Scrambler Ducati Nightshift - Charging the Battery

Charging the 
Removing the 

Have the  removed at a Ducati Dealer or
authorised Service Centre.
To reach the  it is necessary to remove the
seat.
Undo screws (B) and remove the  cover (A).
Loosen the screws (1), remove the positive cable (2)
and the (ABS) positive cable (3) from the positive
terminal.
Remove the negative cable (4) from the negative
terminal and remove the  by sliding it out of
its housing.
 the 

When  must be  ALWAYS
contact a Ducati Dealer or authorised Service Centre.
Grease the screws (1).
Refit the  and connect the positive cable (2)
and the ABS positive cable (3) to the positive
terminal.
A
B
Fig 169
1
4
2
3
Fig 170
180