and are displayed.
The currently set mode is shown on the right side of
the screen.
Use (1) and (2) to scroll and select the desired
mode. Press ENTER (3) to validate, then select
"Back", and press ENTER (3) again to exit.
Note
In case of disconnection, the automatic
mode is set.
Automatic
The turn indicators switch automatically the
turn, as calculated based on vehicle speed, leaning
angle and in general according to the analysis of
vehicle dynamic conditions.
This means that automatic is triggered
when vehicle speed exceeds 20 km/h (12.4 mph)
the turn indicator was pressed.
Turn indicators also switch automatically if they
remained on for a long mileage, which can range
between 200 and 2000 metres (656-6562 feet),
depending on vehicle speed when the turn indicator
was pressed.
If the turn indicator switch is again operated, while
turn indicator is still on, automatic feature
is re-initialised.
Units
Language
Turn signals
Bluetooth
Date and time
Manual-Off
Auto-off
Back
Back
Fig 139
157
To Next Page
Loading...