If drive chain is too tight or slack, adjust tension
so as to bring values back to the specified range.
Correct tightening of swinging arm screws (1) is
critical to rider and passenger safety.
Improper chain tension will lead to early wear of
transmission
Check the correspondence of the positioning marks
on both sides of the swinging arm to ensure a
wheel alignment. Grease the wheel nut thread
(2) with SHELL Retinax HDX2 and tighten it to a
torque of 145 Nm. Grease the adjuster screws (1)
thread with SHELL Alvania R3 and tighten them to a
torque of 10 Nm.
To ensure the best and long life of
the chain, please follow the information related to
chain cleaning, lubrication, inspection and
tensioning.
Fig 173
184
To Next Page
Loading...