Operation & Maintenance Manual──LG946L Wheel Loader
29
NEVER get on or off the machine while it is moving.
7.2 Notice for Cold Area
z Clear the water, snow or dust attached to wires, switches, power insert or sensor and the
covers of these parts. Otherwise, the water in these parts may be frozen and an unpredictable
accident may be caused.
z Before operation, preheat sufficiently. The machine won’t start if do not preheat before
operating the conrol handle of the working equipment and an unpredictable accident may be
caused.
z Operate the working equipment control handle to let the hydraulic oil cycle in the hydraulic
system (Do this by letting the pressure of the system rise up to the system setting, and then
release to let the oil flow back to the hydraulic oil tank ) to preheat the hydraulic oil, so as to
guarantee better reaction and prevent malfunction.
z Do not charge the storage battery with frozen electrolytes, and do not use other power to
start the engine. It is dangerous and can cause fire. Please refer to CHAPTER III 3.5.3
Operation in Cold Weather
.
8 SAFETY EXAMINATION AND REPAIR
8.1 General Knowledge
z Operation and maintenance people should be trained
to become the licensed. Do not allow anyone to enter
the working area except the maintenance people. If
necessary, please assign people to guard.
z The repair of the machine should follow the
procedures. Ask the Shandong Lingong Construction
Machinery Co. Ltd. for help if you don’t know how
to do the repair.
z Assure that the people who are responsible for
repairs, who decide the working procedures, who
determine the person in charge and repair the
machine have been trained to, assemble and
To Next Page
Loading...
Need help?
General
