Lubrication System
Oil
Change volume, including filter change 48 liter (12.68 US gal)
TAD1650VE 53 liter (14 US gal)
Oil pressure, hot engine
at operating speed 300-650 kPa (44–94 psi)
TAD1650VE 400–650 kPa (58–94 psi)
Oil filter
Full flow filter 2
By-pass filter 1
Lube oil pump
Type Gear driven
Oil recommendations
Oil grade
Sulfur content in fuel, by weight
up to 0,5 % 0,5 – 1,0 %
more than 1,0 %
1)
Oil change interval: Reached first in operation:
VDS-3
VDS-2
2)
600 hrs / 12 month 300 hrs / 12 month 150 hrs / 12 month
NOTICE! Mineral based oil, as well as fully or semi-synthetic, can be used on condition that it complies with
thequality requirements above.
1) If sulfur content is > 1.0 % by weight, use oil with TBN > 15.
2) The oil must also comply with at least one of the following specifications ACEA:E7, ACEA:E5, Global DHD-1, API:CI-4 or API:CH-4.
VDS = Volvo Drain Specification
ACEA = Association des Constructeurs Européenne d’Automobiles
API = American Petroleum Institute Global
DHD = Global Diesel Heavy Duty
TBN = Total Base Number
Viscosity
Select the viscosity according to the table.
The temperature values refer to stable ambient tem-
peratures.
* SAE 5W/30 refers
to synthetic or semi-synthetic oils.
Technical Data
82 7748681 12-2011
To Next Page