r3bEL mini User Manual
6
2 Safety Precautions
Please read this section carefully before using the printer.
2.1 General Safety
● The r3bEL bioprinter should only be used with the supplied power adapter to avoid the risk
of fire or damage to the bioprinter.
● Wires carrying current will be running at 120V AC or 12V DC and can cause electric shock if
tampered with.
● Loose clothing or hair should be secured prior to using the bioprinter to prevent being
caught in moving parts of the machine.
● When handling syringes, especially with sharp needle tips, extra care should be taken to
avoid poking or stabbing yourself.
● Use only blunt tip syringe needles for all bioprinting activities.
● For disposal and handling of biohazardous waste or contaminated items, please reference
and follow the safety guidelines for the laboratory.
2.2 Protection
● The r3bEL bioprinter should not be exposed to excessive liquid or damage may occur.
● Do not shut down the bioprinter or pull out the microUSB cable when loading a digital
model, or the model data may be lost.
● Do not load the syringe before homing the printer.
● When priming make sure there is a gap distance of at least 30 mm between the needle tip
and bed to allow smooth flow of the material.
To Next Page
Loading...