Seagull Models EDGE 540 - Page 5

www.seagullmodels.com
17
 2) Elevator and rudder pushrods assembly
follow pictures below.
1) Thread one clevis and M2 lock nut on
to each elevator control rod. Thread the horns
on until they are flush with the ends of the con-
trol rods.
ELEVATOR - RUDDER PUSHROD
INSTALLATION.
Right side.
Elevator control horn.
Left side.
Elevator
control horn.
Rudder
control horn.
Rudder pushrod.
Elevator pushrod.
Elevator pushrod.
Throttle.
Rudder.
Elevator.
Elevator.
Clevis.
Control horn.
Rudder pushrod.
Elevator pushrod.