8. FAQ
HDD Questio
1. Why do recording after the HDD ?
A: The problem r when the HDD ted; or the
er is being turn off or the Recording Rate setting is Zero or the Record Mode
setting is selec reco ing when the
ns:
Q: es the DVR not is installed
might occu is not well installed or unformat
DVR pow
ted (the single-way rding selection will stop record
DVR is full).
2. Q: How do I turn off the message “HDD is not installed” on the display screen?
A: Please install the HDD or you may switch off the beeping sound by turn off the
BUZZER under the ALARM setting.
Page 60
To Next Page
Loading...