Secutron MMX-2009-12NDS User Manual

Start Up
10
Passcodes
Factory Defaults
FROM THE FACTORY PASSCODES ARE:
Level 1: 1111
Level 2: 2222
Level 3: 3333
A passcode is not required for Level 0 access. Passcodes provide three different levels of menu access. Default
passcode 1111 allows Level 1 Access. Default passcode 2222 allows Level 2 access. Default passcode 3333 allows
Level 3 access.
ACCESS LEVELS FOR THE FOLLOWING FEATURES, ARE DEFINED (SET AT THE FACTORY) AS:
Reports: 0
Aux. Bypass: 0
Device Bypass: 1
Walk Test: 1
Day/Night Mode: 0
Set Time: 1
Clear Event Log: 2
Clear Verification Count: 2
Config/Network Reset: 2
Manual Enable: 0
Note: You can change these access levels via the MMX
TM
Configurator MSW-025.
MGC Network
Fire Alarm Control Panel
Normal Condition
June 17, 2016
THESE BUTTONS
REPRESENT THE
CORRESPONDING
NUMBER IN THE
MENU MODE
0 1 2 3
Pressing the Alarm Queue button represents the number 0,
Pressing the Supv. Queue button represents the number 1,
Pressing the Trouble Queue button represents the number 2,
Pressing the BLDG Queue button represents the number 3.
NOTE: THERE IS NO PASSCODE NUMBER AVAILABLE ABOVE 3, THEREFORE, PASSCODES
ARE MADE UP OF NUMBERS 0, 1, 2, AND 3 AND CAN BE UP TO 20 DIGITS LONG.
ALM
QUEUE
SUP
QUEUE
TBL
QUEUE
BLDG
QUEUE
MENU
CANCEL
ENTER
INFO

Secutron MMX-2009-12NDS Specifications

General

Brand	Secutron
Model	MMX-2009-12NDS
Category	Control Panel
Language	English