MMX
TM
User Guide
35
5. Set Time
To enter the Set Time option, you must be in the Command Menu. To enter the Command Menu, press
when the display is in normal mode.
Note: Select this option if you would like to set the time only.You must use the
Configurator to change the date.
Step 1: Select Set Time
1. Press to select the Command Menu.
2. Use and to scroll the cursor to “Set
Time”.
3. Press when the cursor flashes beside “Set
Time” to select the Set Time option.
Step 2: Enter your passcode (if required)
Enter your passcode. See page 10 for instructions on
entering passcodes.
Step 3: Set the Time
•Use and to change the time.
•Use and to move from hours, to minutes,
to AM/PM.
•When you are finished, press to return to the
Command Menu.
•The system will display the message “Time updated”
and return to the Command Menu.
- Command Menu -
4 Day/Night mode
5 Set Time
6 Clear Event Log
Enter passcode for
level 2 or higher:
- Change Time -
Time: 12:08 PM
To Next Page
Loading...
Need help?
General
