MMX
TM
User Guide
41
Page to Alert LED
Illuminates steady green when the Page to Alert pushbutton is active.
AC ON LED
This green LED illuminates steadily to Indicate that AC power is present.
Page Ready LED
Illuminates steady green when the push-to-talk (PTT) on the microphone is depressed (active).
Lamp Test LED
This amber LED illuminates steadily to indicate that the Lamp Test has been activated.
QMP-5101N/V Pushbutton Controls
Warden Page Button
When depressed, the Warden Page button enables voice paging from the firefighters' telephone (if connected)
to all zones selected for paging, unless page inhibit is active. Note that pressing PTT will not result in any paging
activity unless there are zones selected for paging. Also note that there must be an active firefighters' telephone
connection for warden paging to occur.
All-Call Button
Selects all zones for voice paging. This button will not function if DIP switch SW1-5 Automatic All-Call is set to
ON.
All-Call Minus Button
Inverts the selection of zones for voice paging. This button will not function if DIP switch SW1-5 Automatic All-
Call is set to ON.
Page to Evac
Pressing this button selects all the audio zones currently in evacuation mode, for paging.
Page to Alert
Pressing this button selects all the audio zones currently in alert mode, for paging.
Page Cancel
Pressing this button de-selects all zones (including those manually selected) from paging.
Lamp Test Button
Momentarily activates all LED indicators.
Microphone PTT Button
The microphone's PTT (push-to-talk) button is located on the microphone itself. When depressed, allows voice
paging (from the microphone) to be enabled to all zones selected for paging, unless page cancel is active. Note
that pressing PTT will not result in any paging activity unless there are zones selected for paging.
To Next Page
Loading...
Need help?
General
