Secutron MR-2300 Series User Manual

63
Configuration
Command Menu-->MR-2300 Config
11.3.7 Opt Zone Label
Use the keys in described below for entering a message. These letter keys are alternate
functions of the numbered keys are physically located in the same position as described
below.
Note: Refer to section 11.2.1 on page 55 for detailed instructions on making menu
selections.
Command Menu/MR-2300 Config/Opt. Zone
Label
1.Indicating zone label
4.
[NAC-1 ]->Default
[NAC-4 ]->Default
KEYPAD TRANSLATION AS MARKED ON THE KEYS
Sequence refers to the number of times the key
must be pressed to achieve the number or
letter
KEY SEQ 1 2 3 4 KEY SEQ 1 2 3 4
--------------------------------------
Key #1 1
Key #2 2 A B C Key #3 3 D E F
Key #4 4 G H I Key #5 5 J K L
Key #6 6 M N O Key #7 7 P R S
Key #8 8 T U V Key #9 9 W X Y
Key #0 0 Q Z Key * Backspace
Key # Forward
Press the ENTER key to input the message.
i
1 NAC-1
2 NAC-2
3 NAC-3
4 NAC-4
Indicating Zone
NAC-1 Label
NAC-1
NAC-4 Label
NAC-4

Secutron MR-2300 Series Specifications

General

Brand	Secutron
Model	MR-2300 Series
Category	Control Panel
Language	English