Seg WIC1 Reference Manual

fN Description
50 Rated frequency
60 Rated frequency
Measuring method
Measuring method: fundamental or rms or 3rd harmonic (only generator protection relays)
Selection list referenced by the following parameters:
• ╚═▷ CT . Measuring method•
Measuring method Description
Fundamental Protection is based on Fundamental (1st. Harmonic)
True RMS Protection is based on root-mean-square value (True RMS)
IG Source
Selection if measured or calculated ground current should be used.
Selection list referenced by the following parameters:
• ╚═▷ CT . IG Source•
IG Source Description
calculated calculated
measured measured
Display of Meas. Values
Select the preferred scaling/unit for the display of measurement values.
Selection list referenced by the following parameters:
•
╚═▷ CT . Display of Meas. Values
•
Display of Meas. Values Description
Based on In,relative All current measuring values are displayed based on In,relative.
Primary current values All current measuring values are displayed as primary currents.
137WIC1WIC1-2.0-EN-REF
13 Selection Lists

Seg WIC1 Specifications

General

Brand	Seg
Model	WIC1
Category	Relays
Language	English