Sega AFTER BURNER CLIMAX - Precautions Regarding Installation Location; Limitations of Usage

PRECAUTIONS REGARDING INSTALLATION LOCATION
2
5
PRECAUTIONS REGARDING INSTALLATION LOCATION
2
This product is an indoor game machine. Do not install it outside. Even indoors,
avoid installing in places mentioned below so as not to cause a fire, electric
shock,injuryand/ormalfunction.
- Places subject to rain or water leakage, or places subject to high humidity in the
proximityofanindoorswimmingpooland/orshower,etc.
- Places subject to direct sunlight, or places subject to high temperatures in the
proximity of heating units, etc.
-Placesfilledwith inflammable gas or vicinity of highly inflammable/volatile
chemicals or hazardous matter.
- Dusty places.
- Sloped surfaces.
- Places subject to any type of violent impact.
-Vicinityofanti-disasterfacilitiessuchasreexitsandreextinguishers.
- The operating (ambient) temperature range is not from 5 to 30 degrees
.
2-1 LIMITATIONS OF USAGE
• Be sure to check the Electrical Specifications. Ensure that this product
is compatible with the location's power supply, voltage, and frequency
requirements. A plate describing Electrical Specifications is attached to the
product. Non-compliancewith theElectricalSpecifications cancausea fire
and electric shock.
• This product requires a breaker and earth mechanism as part of the location
facilities.Usingtheproductwithoutthesecancauseareandelectricshock.
• Ensure that the indoor wiring for the power supply is rated at 15A or higher (AC
singlephase100V~120Varea),and7Aorhigher(AC220V~240Varea).Non-
compliance with the Electrical Specifications can cause a fire and electric
shock.
• Be sure to use an independent power supply equipped with an earth leakage
breaker. Using a power supply without an earth leakage breaker can cause an
outbreakofreifapowersurgeoccurs.
• Putting many loads on one electrical outlet can cause generation of heat and a
reresultingfromoverload.
• When using an extension cord, ensure that the cord is rated at 15A or higher (AC
100V ~ 120V area) and 7A or higher (AC 220V ~ 240V area). Using a cord rated
lowerthanthespeciedratingcancauseareandelectricshock.