ASSEMBLY AND INSTALLATION
15
6
Tools Required for Assembly Operation
- Philips screwdriver (for M4, M6 screws)
- A 7, 10 millimeter socket wrench or hexagonal screwdriver (for M4, M6 hexagon bolts and nuts)
A 24 millimeter spanner (Adjustable spanner) - Stepladder
- Master key (accessory)
The assembly of this product is performed in the following 6 steps.
1 ASSEMBLING THE BILLBOARD
2 ASSEMBLING THE CABINET
3 SECURING INTO LOCATION
4 CONNECTING THE DVD DRIVE
5 APPLYING POWER FOR THE FIRST TIME
6 ENGAGEMENT OF POWER SUPPLY AND SOFTWARE INSTALLATION
7 CONFIRMATION OF ASSEMBLY
24mm
To Next Page
Loading...
