58
EXPLANATION OF TEST AND DATA DISPLAY
9
Select GUN ADJUSTMENT to display this screen.
This screen allows you to adjust the five calibration targets (TOP, LEFT, CENTRE, RIGHT and BOTTOM). Use each
target to calibrate as follows.
<Operation>
1
Aim the controller at the five targets on the screen (Top, Left, Right, Bottom and Centre) and pull the trig-
ger when each target is in view using the controllers aligned sights.
2
Once Player 1 controller has been set up, carry out the same operation using the Player 2 controller..
3
Move the cursor to EXIT and press the TEST Button, the calibration screen exits and the game test mode
menu screen reappears.
FIG. 9-3c01 GUN Adjustment Screen
Calibration is relevant to operability. Manipulate and adjust the control unit to
enusre that they correctly adjusted for game play..
9-3d GUN ADJUSTMENT
GUN ADJUSTMENT
PLAYER 1 PLAYER 2
TOP -75 231 TOP -45 203
LEFT -288 124 LEFT -288 180
CENTRE -3 89 CENTRE 0 102
RIGHT 220 102 RIGHT 255 147
BOTTOM 2 -138 BOTTOM -18 -165
DEFAULT DEFAULT
CANCEL CANCEL
CURSOR CURSOR
OUT OF SCREEN OUT OF SCREEN
SELECT WITH SERVICE BUTTON
AND PRESS TEST BUTTON
To Next Page
Loading...
