Sega OutRun - Page 33

o
Operate the
dip
switches. When
"ON" is indicated at
the
right
side
of the corresponding item on
the screen,
it is
OK.
o
If
the data value increases when pressure is
applied to
the
accelerator's or brake's
pedal,
it tests out satisfactorily.
o
When
the tests are ended, push
the TEST button.
(
3
)
Output
Test
If
the
start LAMP
lights up, it is
functioning properly.
Push the TEST
button when
the
testing has
been
completed.
(4)
Motor
Test
Adjustment
of each limit switch,
and adjustment
of
the
rolling
movement.
The value
with an
asterisk
(*)
represents
the
one
automatically
checked
during
the warm-up
time.
For
adjustment,
see
page
17
-
31
-