8
Press Button B and then release it
The watch enters the mode for setting the preliminary
position of the date.
Press
and then
release
* During movement of the date, the buttons cannot be
operated.
The seconds hand stops at the 20-second position.
The date moves, and stops when it indicates the
preliminary position.
9
Turn the crown to adjust the date to
“1”
Adjust so that the numeral “1” appears in the center of
the date window.
* If “1” appears for the date, go to operation J
Turn the crown quickly
to move it
continuously. Turn the
crown again to stop.
Turn the crown clockwise to
advance 1 step.
Turn the crown
counterclockwise to set back
1 step.
10
Press Button B and then release it
The watch goes into the preliminary position setting
mode of the hour and minute hands.
Press
and then
release
The seconds hand stops at the 0-second position.
11
Continue to press Button A (3
seconds)
The hour/minute hands move, and stop at “12:00 AM”.
Press for
3 seconds
54
7
TROUBLESHOOTING
5X83 GPS SOLAR
To Next Page
Loading...
