Seiko 5X83 - Finalizing Time Settings; Completing Preliminary Position Adjustment; Setting Time via GPS or Manual Input

12
Push the crown back in
The watch exits the mode to adjust the preliminary
position, and the seconds hand and the hour/minute
hands start moving.
0 1 2
Push
back in
13
Set the time by receiving GPS
signals
When you are in a place where GPS signals can be
easily received, adjust the time zone.
→ How to adjust the time zone P. 22
When operations A
to L are complete, be sure to
set the time.
When you are in a place where GPS signals cannot be
received
① Carry out manual time zone setting
→ How to manually set the time zone P. 25
② Manually set the time
→
How to manually set the time P. 50
When the time is set, operation is
completed.
55
7
TROUBLESHOOTING
5X83 GPS SOLAR