Table 2-2 Graphic Printer Specifications (continued)
Item Specifications
Base model code MTP201 MTP401
during
printing
3.2A max.
Current
consumption
(room
temperature,
5.0V)
during paper
feed
250mA max
Operating temperature range 0 to 50ºC
Storage temperature range −40 to 60ºC
Life span 5 hundred thousand lines (5.0V rated energy, room temperature, “8” full line printing)
Note1
Failure rate 10
-6
/ line or less (5.0V rated energy, room temperature, “8” full line printing)
Operating noise (room
temperature, 5.0V)
70dB or less (back ground noise: 40dB or less, measuring distance: 15cm, weighing
network: JIS A curve, dynamic characteristics: SLOW range)
Paper feed force 0.196N (20gf) or more
Paper hold force 0.49N (50gf) or more 0.98N (100gf) or more
Dimensions
(W × D × H)
70 × 34 × 14.4mm 91.5 × 35.5 × 20mm
Mass Approx. 40g Approx. 50g
Paper width 58 mm
0
1-
0
1-
80
mm
Paper thickness 65 ± 5 μm (59 ± 5 μm when using TF50KS-E2D)
Recommended thermal paper
Note1) Should be no scratches due to foreign material.
Maker / sensitivity Normal High sensitivity
Nippon Paper Industries TP50KS-A TF50KS-E2D
Oji Paper Co., Ltd. - PD450
Mitsubishi Paper Co., Ltd. F-200U7N5 F-200U9W3
2-5
To Next Page
Loading...
Need help?
General
