Seiko MTP Series User Manual

PREFACE
This reference manual describes the specifications and basic operating procedures for the MTP Series
Thermal Printer Mechanisms. Read it thoroughly so that you are able to use the MTP Series Thermal
Printer Mechanisms properly.
The MTP (RoHS supporting) series has the following eight types of printers.
• MTP102-13B-E
• MTP102-16B-E
• MTP201-20B-E
• MTP201-24B-E
• MTP201-G128-E
• MTP201-G166-E
• MTP401-40B-E
• MTP401-G280-E
In this reference manual, the information mentioned as MTP is common to all models unless otherwise
noted, and if the information is different depending on the model, specific model name is mentioned
clearly.
Fully investigate the intellectual proprietary rights of the sample circuits designed in this manual before
using.
The printer complies with EU RoHS Directive (2002/95/EC).
The printer contains “Pb”, the details are described below.
• a particular free-cutting steel parts, a particular component in glass of the electronic parts
*Lead-containing items listed above are exempt from RoHS (2002/95/EC).
iii

Seiko MTP Series Specifications

General

Brand	Seiko
Model	MTP Series
Category	Printer
Language	English