Sekonic L-608 - Page 7

q Measuring Mode Icons
Ambient (see page 13)
Auto-Reset Cordless Flash (see page 19)
Cord Flash (see page 18)
Wireless flash radio triggering mode (see page 35)
w Incident / Reflected Spot Function Icons (see page 7)
Appears when in Incident mode
Appears when in Reflected Spot mode
e ISO Display
Displays ISO film setting
Displays second ISO film setting when ISO 2 button is pressed
r Flash Analyzing indicator
0 to 100% in 10% increments (percentage of the flash in the total exposure)
t +/- Compensation Indicator
Appears when +/- Compensation is set
y Digital aperture value, Aperture Priority, EV Brightness Difference, Average function, EV display
Appears when in Aperture Priority (f/stop) mode (see page 14)
Appears when using brightness difference function (See Page 25)
Appears when using Averaging function (see page 25)
Appears when using EV mode (see page 15)
u Analog Scale
Displays marks at apertures or shutter speed indicating full or half stop values (608),or full or 1/3
stop values (608 CINE) for measurement, also displays memory and average values
Appears when below display range
Blinks when under exposed below measurement range
Appears when above display range
Blinks when over exposed above measurement range
i Shutter priority indicator, shutter speed display for still photography or frames per second (f/s) for
cinematography
Appears when Shutter Priority (T) mode (see page 13)
Appears when shutter speed is in minutes
Appears when shutter speed is in full seconds
Appears when cine speed is set in frames per second (see page 16)
Appears when shutter angle is set to a value other than 180 degrees (608 CINE)(see
page 17)
o Battery Power Indicator (see page 4)
!0 Memory / Multiple Flash Indicator Display
Appears when Multi (cumulative) flash measurement mode and shows the cumulated
number of measurements (see page 21)
Appears when reading is memorized and shows the number in memory (see page 24)
!1 Illumination mark/brightness mark
Appears when Foot-Candle is selected (608/608 CINE)
Appears when Lux is selected (608/608 CINE)
Appears when Foot-Lambert is selected (608 CINE)
Appears when Cd/m
2
is selected (608 CINE)
2. Explanation of the Liquid Crystal Display
-3-