Sekonic Litemaster Pro L-478DR - Functions; Custom Setting Function; Custom Setting Function List; How to enter Custom Setting

11
3 Functions
3-1. Custom Setting Function
This enables quick and easy setup of individual meter preference.
For other Custom Setting, please refer to the L-478 Series Common Operating Manual.
Custom Setting specic to L-478DR Series for PocketWizard is as follows.
3-1-1. Custom Setting Function List
Setting No. Custom Setting Name Item Default Setting
6 Flash Mode*1, On Off - On
c) Radio Mode*1,*2 On Off - On
c)-i
Radio System
Preference*2
ControlTL Standard
ControlTL +
Standard
ControlTL +
Standard
*1. When Flash Mode is set “Off”, the sub setting of all ash modes: a) Cordless Mode
to d) Multiple (Cumu.) Flash Mode cannot be selected.
*2. When Radio Mode is set to “Off”, the sub setting of c-i) Radio System Preference
cannot be selected.
3-1-2. How to enter Custom Setting
1) Press the Menu button on the meter to open the Menu screen.
2) Touch [3. Custom Setting] and select [c)Radio Mode] under
[6. Flash Mode] in the displayed Menu screen.
3) Touch the radio button to select On or Off.
Menu screen Custom Setting screen Radio Mode screen
4) Touch [OK] to complete the setting and return to the Custom Setting screen. (Touch
[Cancel] to return to the Custom Setting screen without change.)
5) Press the Menu button at the Custom Setting screen to return to the Menu screen.
Press the Menu button again to return to the Measuring screen.
Menu button