Sena 10s - Audio and Software Configuration

10S
16
4.6 Volume Adjustment
You can easily adjust the volume by rotating the Jog Dial. You will hear
a beep when the volume reaches the maximum or minimum level. The
volume is set and maintained independently at different levels for
each audio source even when you reboot the headset. For example,
once you set the volume for mobile phone handsfree, it will not change
even if you adjust the volume for your Bluetooth MP3 music. However,
if you adjust the volume during stand-by mode, it will affect volume
levels of every audio source.
4.7 Sena Softwares
4.7.1 Sena Device Manager
The Sena Device Manager allows you to upgrade the rmware and
congure the device settings directly from your PC. Using this
software, you can assign speed dial presets, FM radio frequency
presets and more. It is available for both Windows and Mac. For more
information on downloading the Device Manager, please visit www.
sena.com.
4.7.2 Sena Smartphone App
The Sena Smartphone App allows you to congure device settings
and read the User’s Guide and the Quick Start Guide. Pair your phone
with your 10S headset (please refer to section 5.1, “Mobile Phone
Pairing - Mobile Phone, Bluetooth Stereo Device” ). Run the Sena
Smartphone App and you can congure its settings directly from your
smartphone. You can download the Sena Smartphone App for Android
or iPhone from www.sena.com/headset-app/.