Sena 10s - Sena 10 S FM Radio Operation; FM Radio On and Off; Seek and Save FM Stations

10S
36
12 FM RADIO
12.1 FM Radio On and Off
To turn on the FM radio, press the Phone Button for 1 second until you
hear a mid-toned double beep sound. You will then hear a voice
prompt, “FM on”. To turn off the FM radio, press the Phone Button for
1 second until you hear a voice prompt, “FM off”. When you power it
off, the 10S will remember the last station frequency. When you power
it on, the last station frequency will be playing.
12.2 Preset Stations
You can listen to preset stations while listening to the FM radio. Tap the
Phone Button once to go upward to your next saved preset station.
12.3 Seek and Save
“Seek” is the function that searches for station to station frequencies.
To use the “Seek” function, please follow the procedure below:
1. Rotate while pressing the Jog Dial clockwise or counter-clockwise
to search down or up the station dial.
2. If the tuner nds a station while searching frequencies, it stops
the seek function.
3. To save the current station, press and hold the Jog Dial for 1
second until you hear a voice prompt, “Preset (#)”.
4. Rotate the Jog Dial in order to select which preset number you
want for that specic station. You can save up to 10 preset stations.
(You may cancel the preset operation by waiting approximately
10 seconds. You will then hear “Save preset cancelled”. You
can also rotate the Jog Dial until you hear “Cancel”. Tap the
Jog Dial to conrm cancellation. You will then hear “Save preset
cancelled”.)
5. To save the current station, tap the Jog Dial again. You will then
hear a voice prompt, “Save preset (#)”.
6. To delete the saved station in the preset number, tap the Phone
Button. You will then hear a voice prompt, “Delete preset (#)”.