Sena 50R - Pairing When the 50 R Is Turned off

50R Low Profile Motorcycle Bluetooth
®
Communication System with Mesh Intercom™ | 19
4 PAIRING THE HEADSET WITH OTHER BLUETOOTH DEVICES
2. Select 50R in the list of Bluetooth
devices detected. If your mobile
phone asks for a PIN, enter 0000.
Device B
Pi
Bluetooth
50R
Note:
• The phone pairing mode lasts for 3 minutes.
• To cancel phone pairing, tap the Center Button.
4.1.2 Pairing When the 50R is Turned Off
1. While the headset is off, press and hold the Center Button and the
(+) Button until the LED flashes red and blue alternately and you hear
a voice prompt, “Phone pairing”.
=
HOLD
Blinking
“Phone pairing”
2. Select 50R in the list of Bluetooth
devices detected. If your mobile
phone asks for a PIN, enter 0000.
Device B
Pi
Bluetooth
50R