Sena 50R User Manual

TABLE OF CONTENTS
1. ABOUT THE MOTORCYCLE
BLUETOOTH COMMUNICATION SYSTEM WITH
MESH INTERCOM™ 7
1.1 Product Details 7
1.1.1 Headset Main Unit 7
1.2 Package Contents 8
2. INSTALLING THE HEADSET ON YOUR HELMET 9
2.1 Installing the Main Unit 9
2.1.1 Using the Hook and Loop Fasteners for Main Unit 9
2.1.2 Using the Double Sided Adhesive Tapes for Main
Unit 10
2.1.3 Using the Clamp for Main Unit 10
2.2 Installing the Speakers 11
2.3 Installing the Microphones 12
2.3.1 Using the Wired Boom Microphone 12
2.3.2 Using the Wired Microphone 14
2.4 External Mesh Intercom Antenna 14
3. GETTING STARTED 15
3.1 Button 15
3.2 Downloadable Sena Software 15
3.2.1 SENA MOTORCYCLES App 15
3.2.2 Sena Device Manager 16
3.3 Powering On and Off 16
3.4 Charging 16
3.5 Checking the Battery Level 17
3.6 Volume Adjustment 17
4. PAIRING THE HEADSET WITH OTHER
BLUETOOTH DEVICES 18
4.1 Phone Pairing 18
4.1.1 Pairing When the 50R is Turned Off 18
4.1.2 Pairing When the 50R is Turned On 19

Sena 50R Specifications

General

Mesh Intercom	Yes
Water Resistance	IP67
Audio Multitasking	Yes
Battery Type	Lithium Polymer Battery
FM Radio	Yes
Certificates	CE, FCC, IC
Voice Command	Yes
Bluetooth Version	Bluetooth 5.0
Intercom Range	Up to 2 km (1.2 miles) in open terrain
Battery Talk Time	Up to 13 hours
Operating Temperature	-10°C - 55°C (14°F - 131°F)
Dimensions Main Module	97 mm x 48 mm x 27 mm (3.8 in x 1.9 in x 1.1 in)
Speaker Driver Unit	40 mm
Wire between Speaker	555 mm (21.9 in)
Bluetooth Profiles	A2DP, AVRCP, HFP, HSP
Audio Features	Advanced Noise Control
Mobile App Support	Yes
Intercom Supports	Bluetooth intercom, Mesh Intercom