50R Low Profile Motorcycle Bluetooth
®
Communication System with Mesh Intercom™
| 58
12 CONFIGURATION SETTING
12.2.11 HD Intercom (Default: Enable)
HD Intercom enhances the two-way intercom audio from normal quality
to HD quality. HD Intercom will become temporarily disabled when you
enter into a multi-way intercom. If this feature is disabled, the two-way
intercom audio will change to normal quality.
Note:
• The intercom distance of HD Intercom is relatively shorter than
that of normal intercom.
• HD Intercom will become disabled temporarily when Bluetooth
Intercom Audio Multitasking is enabled.
12.2.12 HD Voice (Default: Enable)
HD Voice allows you to communicate in high-definition during phone
calls. This feature increases the quality so that the audio will be crisp
and clear during phone call conversations.
If this feature is enabled, incoming phone calls will interrupt intercom
conversations and audio from the SR10 will not be heard during
intercom conversations. Three-Way Conference Phone Call with
Intercom Participant will not be available if HD Voice is enabled.
Note:
• Refer to the manufacturer of your Bluetooth device that will be
connected to the headset to see if it supports HD Voice.
• HD Voice is active only when Bluetooth Intercom Audio
Multitasking is disabled.
12.2.13 Smart Volume Control (Default: Disable)
Enabling Smart Volume Control automatically changes the level of the
speaker volume based on the level of the environment noise. You can
enable it by setting the sensitivity to low, medium or high.
12.2.14 Sidetone (Default: Disable)
Sidetone is audible feedback of your own voice. It helps you to naturally
speak at the correct level according to varying helmet noise conditions.
If this feature is enabled, you can hear what you are speaking during an
intercom conversation or a phone call.
To Next Page
Loading...
