SPIDER RT1 Motorcycle Mesh Communication System | 12
2 INSTALLING THE HEADSET ON YOUR HELMET
Note:
• After you install the wired boom microphone, make sure you
reinstall the helmet’s internal padding.
• You can use the boom microphone holder after attaching the hook
and loop fastener for boom microphone holder on it to ensure
secure installation.
3. Make sure that the microphone’s receiver is located near your mouth.
4. Adjust the head of the microphone so that the tab is facing away from
your mouth.
Tab
5. Align the arrows on the main unit and microphone cables and insert
the microphone cable into the microphone connector.
Note: The shortest cable is for the microphone.
To Next Page
Loading...
