Sena SRL2 Manual

SRL2
22
Parallel Connection of SR10 and Mobile Phone by
Bluetooth Second Mobile Phone Pairing
Smart Phone
Two-way Radio
SRL2
GPS
Sena SR10
Radar Detector
HFP
+
A2DP
Mobile Phone
Pairing
Second Mobile
Phone Pairing
HFP
Wired
Connection
Wired
Connection
Wired
Connection
5 PAIRING WITH SELECTIVE PROFILE:
A2DP STEREO OR HANDSFREE
If you have an MP3 stereo music phone such as a smartphone,
sometimes you may need to selectively use the SRL2 for A2DP stereo
music only or for mobile phone handsfree only. These instructions are
for advanced users who want to pair the SRL2 to their smartphones
only with one selective prole: A2DP for stereo music or HFP for phone
calls.
If you have previously paired a mobile phone to the SRL2, you must
clear the previous paring list on both devices; the mobile phone and
SRL2. To clear the pairing list on SRL2, please do a factory reset or
follow the pairing list clearing procedure described in this manual. To
clear the pairing list on the mobile phone, please refer to the mobile
phone manual. For most smartphones, delete the Sena SRL2 from the
list of Bluetooth devices in the settings menu.

Sena SRL2 Specifications

General

Bluetooth Version	Bluetooth 4.1
Talk Time	10 hours
Charging Time	2.5 hours
FM Radio	Yes
Battery Type	Lithium Polymer Battery
Certificates	CE, FCC, IC
Music Sharing	Yes
Voice Command	Yes
Intercom Range	1.6 km (1.0 mile)
Operating Temperature	-10°C to 55°C (14°F to 131°F)
Profiles	Headset Profile (HSP), Hands-Free Profile (HFP), Advanced Audio Distribution Profile (A2DP), Audio Video Remote Control Profile (AVRCP)
Audio Features	Advanced Noise Control™
Compatibility	Shoei GT-Air II, Shoei Neotec II, Shoei J-Cruise II
Mobile App Support	Yes
Intercom Participants	8-Way Intercom