SRL2
43
English
17 ADDITIONAL INTERCOM SETTINGS
17.1 Audio Multitasking™ (Default: Enable)
You can enable or disable Audio Multitasking through the Sena Device
Manager or the Sena Smartphone App. Audio Multitasking allows you
to have an intercom conversation while simultaneously listening to
music, FM radio, or GPS instructions. The overlaid audio is played in
the background with reduced volume whenever there is an intercom
conversation and will return to normal volume once the conversation is
nished. If this feature is disabled, any incoming or outgoing intercom
will interrupt your audio channel.
17.2 Intercom-Audio Overlay Sensitivity (Default: 6)
You can adjust Intercom-audio overlay sensitivity through the Sena
Device Manager or the Sena Smartphone App. The music, FM radio
and GPS volume will be lowered to play in the background if you talk
over the intercom while the overlaid audio is playing. You can adjust
the intercom sensitivity to activate this background audio mode. Level
1 has the lowest sensitivity and level 10 has the highest sensitivity.
Note:
If your voice is not louder than the sensitivity of the selected level, the
overlaid audio will not be lowered.
17.3 Audio Overlay Volume Management (Default: Disable)
You can enable or disable Audio Overlay Volume Management through
the Sena Device Manager or the Sena Smartphone App. The music,
FM radio and GPS overlaid audio reduces in volume whenever there is
an ongoing intercom conversation. If Audio Overlay Volume
Management is enabled, the volume level of the overlaid audio will not
be reduced during an intercom conversation.
17.4 HD Intercom (Default: Enable)
You can enable or disable HD Intercom through the Sena Device
Manager or the Sena Smartphone App. HD Intercom enhances the
two-way intercom audio from normal quality to HD quality. HD Intercom
will become temporarily disabled when you enter into a multi-way
intercom. If this feature is disabled, the two-way intercom audio will
change to normal quality.
To Next Page
Loading...
Need help?
General
