EasyManua.ls Logo

Senco FN65DA - Extension Cord Safety

Senco FN65DA
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...


25 50 100 150
16 16 16 14



7,5 15 30 45
16 16 16 14



7,5 15 30 45
16 16 16 14




An extension cord should not be
used unless absolutely necessary.
Use of improper extension cord
could result in a risk of re and
electric shock.
If extension cord must be used,
make sure:
That pins on plug of extension
cord are the same number, size,
and shape as those of plug on
charger;
That extension cord is properly
wired and in good electrical
condition; and
That wire size is at least as
large as the one specied in the
table.
Do not operate charger with dam-
aged cord or plug. If damaged,
have replaced immediately by a
qualied serviceman.
Do not operate charger if it has re-
ceived a sharp blow, been dropped,
or otherwise damaged in any way;
take it to a SENCO Authorized
Service Center.
Do not disassemble charger or bat-
tery cartridge; take it to a SENCO
Authorized Service Center when
service or repair is required. Incor-
rect reassembly may result in a risk
of electric shock or re.
To reduce risk of electric shock,
unplug charger from outlet before
attempting any maintenance or
cleaning.
Do not charge battery cartridge
when temperature is BELOW 0˚C
(32˚F) or ABOVE 40˚C (104˚F).
12

Related product manuals