Repairs other than those described
here should be performed only by
trained, qualied personnel. Con-
tact SENCO for information at:
1-800-543-4596.
Read section titled “Safety Warn-
ings” before maintaining tool.
The employer and tool operator are
responsible for assuring that the
tool is kept in safe working order
as described in the tool operating/
safety instructions.
With battery disconnected, make
daily inspection to assure free
movement of workpiece contact
element and trigger. Do not use
tool if workpiece con tact element
or trigger sticks or binds.
R
Routine lubrication is not neces-
sary. Do not oil.
Wipe tool clean daily and inspect
for wear. Use non-ammable clean-
ing solutions only if necessary.
Such solutions may dam-
age other tool parts.
Li-Ion
To preserve natural resources,
please recycle or dispose of
properly.
This product contains Li-ion.
Local state or federal laws may
prohibit disposal of Li-ion batteries
in ordinary trash. Consult your local
waste authority for information
regarding available recycling and/
or disposal options.
For more information on battery
recycling call 1-800-8BATTERY.
22
To Next Page
Loading...
