Commence ice-cream production
1
When the premises are
RSHQHG \RX ZLOO ȴQG WKH
machine in conservation
mode.
ΖQ RUGHU WR REWDLQ LFH
cream, see the “Produc-
tion of ice-cream” chap-
ter. A few seconds will
be enough to allow the
ice-cream to achieve the
proper consistency to be
able to recommence sales.
Fill the tank
When this icon lights up on the control pan-
HOWKLVPHDQVWKDWLWLVQHFHVVDU\WRUHȴOOWKH
SURGXFWWDQN6HHȊ)LOOLQJȋFKDSWHU$IWHUȴOOLQJ
the tank, you will be able to go back into pro-
duction.
Change pump tube
When this icon lights up on the control pan-
el, this means that it is necessary to replace
the rubber tube on the peristaltic pump. See
chapter “Change pump tube”.
Re-establishing consistency
:KHQWKLVLFRQLVȵDVKLQJRQWKHFRQWUROSDQ-
el, this means that the ice cream is not ready
to be served.
By pressing this button, the ice-cream will
have the proper consistency to be ready to
serve in a few seconds.
2QWKHPDLQVFUHHQ\RXFDQVHHWKHWHPSHUDWXUHRIWKH
refrigerator and the two cylinders. The presence of an
arrow pointing downwards indicates that the cylinder is
getting colder.
Cabin +2º C
+018º C
+022º C
Temperature of the refrigerator
Temperature
left cylinder
Temperature
right cylinder
1.By pressing again, you can activate the function
of manual defrosting. The evaporator is subject to the
IRUPDWLRQRIIURVWZKLFKPD\UHGXFHLWVHHFWLYHQHVV
ΖQRUGHUWRSUHYHQWWKLVWKHPDFKLQHKDVDQDXWRPDWLF
and a manual defrosting cycle.
Force Defrosting
Press Button +
1
ΖIGXULQJWKHGDLO\XVH\RXZDQWWR
FKDQJHWKHLFHFUHDPȵDYRU
(PSW\LQJVHHSDJ
2SHUDWLRQVHHSDJ
RESET
MIX
STOP
START
RESET
MIX
STOP
START
17
5.1 Light signals
5.Warnings and
adjustments
'DLO\XVH/LJKWVLJQDOV
3.6 Daily use
2SHUDWLRQ