27
Adjusting settings via the operating menu
Resetting the settings made in the operating menu – “Reset”
When resetting the settings made in the operating menu, only the
selected settings for the pilot tone and for the frequency banks “U1” to
“U6” remain unchanged. For an overview of the factory-preset default
settings, refer to the enclosed frequency information sheet.
Displaying the software revision – “Software Revision”
You can display the current software revision of the bodypack transmitter.
왘 For information on software updates, visit the SK 2000 product page
on our website at www.sennheiser.com.
Advanced
Menu
Reset Yes
Reset
“Stored”
Select the desired
setting; apply the
setting
Call up “Reset”
To Next Page
Loading...
