Sennheiser SK 2000 - Adjusting Settings via the Operating Menu; Pilot Tone Transmission (Pilot Tone); Adjusting Display Contrast (LCD Contrast)

26
Adjusting settings via the operating menu
Emulating guitar cables – “Cable Emulation”
Via the “Cable Emulation” menu item, you can emulate 4 different guitar
cable capacities.
Activating/deactivating the pilot tone transmission –
“Pilot Tone”
The bodypack transmitter adds an inaudible signal, known as the pilot
tone, to the transmitted signal. The receiver detects and evaluates the
pilot tone.
The pilot tone supports the receiver’s squelch function, thus protecting
against interference due to RF signals from other devices.
Adjusting the contrast of the display panel – “LCD Contrast”
You can adjust the contrast of the display panel in 16 steps.
Cable Emulation
Advanced Menu
Cable Emulation
Medium
Medium
Cable Emulation
High
“Stored”
Select the desired
setting
Store the settingCall up “Cable
Emulation”
Name
Advanced Menu
Pilot Tone
Active
Pilot
Inactive
Pilot
“Stored”
Call up
“Pilot Tone”
Select the desired
setting
Store the setting