Caution: When attached to the motor the propeller spins at high
speeds and can be potentially dangerous if it comes into contact with
exposed skin. Be sure to always keep your hands clear of the propeller
when the battery is attached to the eBee X.
11. Motor: Spins the propeller.
12. Ambient temperature sensor: Meaasures the temperature of the air out-
side the drone.
13. Ailerons: Used to control the eBee X while in flight.
14. GNSS/RTK Antenna: The advanced GNSS antenna, capable of capturing
severalGNSS signals, is used for navigation and to increase geotagging pre-
cision.
15. Camera opening
16. Central body
17. Ground sensor: The LiDAR ground sensor is used to measure the distance
to the ground.
18. Skid plate: The drone lands on this tough, plastic skid plate.
19. Wing struts: Reinfornce the wings’ connection with the central body and
provide the wings with strength and rigidity.
20. Wing release: Press to detach the wing.
To Next Page
Loading...
