IMPORTANT SAFETY INFORMATION
Please read and observe the following:
Remove line power before wiring transmitter connections.
Wiring or repairs should only be performed by qualified personnel and only to an
unpowered transmitter.
Whenever it appears that Transmitter safety is questionable, disable the transmitter to
ensure against any unintended operation. For example, an unsafe condition is likely
when:
1） The transmitter appears visibly damaged.
2） The transmitter fails to operate properly or provide the intended measurements.
3） The transmitter has been stored for long periods at temperatures above 176F (80C).
The transmitter must be installed by specially trained personnel in accordance with
relevant local codes and instructions contained in this user manual. Observe the
transmitter’s specifications and relative parameter’s ratings.
To Next Page
Loading...
