9
4.2 Sensor Input Connections
CAUTION:
• As electrical noise may interfere with electrode signal, please do not route the electrode cable in a
conduit containing AC power wiring.
PH Sensor Input Connections:
coax center
ORP Sensor Input Connections:
10K Ohm Resistor
customer
supplied
TX105
4.3 OC Output
4.3.1 Open Collector Output Connections
Connection to a PLC with built-in power supply
10K Ohm Resistor
customer
supplied
10K Ohm Resistor
10K Ohm Resistor
Note: If sensor does not have
ATC, short TC- to TC+
coax braid
Red
Black
coax center
coax braid