Sensorex TX105 - View Menu for ORP; Editable Menu; Editing Procedure

13
Theoretical mV values（25℃）
PH
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
mV
414
355
296
237
177
118
59
0
-59
-118
-177
-237
-296
-355
-414
5.2 View Menu for ORP
Display
Description
Default display：
ORP
366
mV
Monitors the ORP value.
All of the displays below are temporary. The system will return to the default display if no keys
are pressed in 10 minutes.
Sensor Input
164 mV
Monitors the millivolt input from the ORP electrode.
4~20mA Output
8.44 mA
Monitors the 4 to 20 mA loop output for the ORP
measurement.
5.3 Editable Menu
5.3.1 Editing Procedure
Step 1. Press and hold the ENTER key for 3 seconds to enter Main Menu:
 If a password is required, enter the correct key code. The key code is entered by
pressing the RIGHT-DOWN-UP-DOWN keys in sequence.
 The system will return to the view menu if no key is pressed for 10 minutes.
Step 2. Navigate the menu with the UP and DOWN keys.
The selected menu is highlighted; press ENTER to edit the menu.
 Only the highlighted item can be edited.
 No parameters will be saved if the ESC key is pressed, and the display will return to
the previous menu.
 The system will return to the view menu if no key is pressed for 10 minutes.