Sentry Sample Sequencer 6 - Specifications

6 Sentry Equipment Corp
Specications
Specications are subject to change without notice.
Applications: The Sentry® Sample Sequencer® 6 is designed to support sample stream switching in Batch or
Continuous modes.
*Solenoid voltage must match DC voltage
SPECIFICATIONS
Standard (7-06362C) (12V)
(7-06362K) (24V)
IO Extender 4 Point (7-06362D) (12V)
(7-06362P) (24V)
IO Extender 8 Point (7-06362E) (12V)
(7-06362N) (24V)
samples 8 4 8
analyzers 2 1 2
AC input
power (24V)
0.52A/115VAC, 0.26A/230VAC, 0.21A/277VAC Frequency: 50-60 Hz
AC input
power (12V)
1.5A/115VAC, 0.9A/230VAC, 0.75A/277VAC Frequency: 50-60 Hz
DC power
(24V)
1.9A/24VDC
DC power
(12V)
3.8A/12VDC
analyzer
inputs
Two (2) AI: 4-20mA (154.5 Ohm load)
+- 1% full scale (max)
6 Digital Inputs for end-of-analysis
indication and system alarm indication
max 28VDC
One (1) AI: 4-20mA (154.5 Ohm load)
+- 1% full scale (max)
3 Digital Inputs for end-of-analysis
indication and system alarm indication
max 28VDC
Two (2) AI: 4-20mA (154.5 Ohm load)
+- 1% full scale (max)
6 Digital Inputs for end-of-analysis
indication and system alarm indication
max 28VDC
outputs DO: 16
AO: 8 (4-20mA; 550 Ohm max load) +-
1% full scale (max)
SOL Out: 8 (12VDC) handling up to 2A*
DO: 8
AO: 4 (4-20mA; 550 Ohm max load) +-
1% full scale (max)
SOL Out: 4 (12VDC) handling up to 2A*
DO: 16
AO: 8 (4-20mA; 550 Ohm max load) +-
1% full scale (max)
SOL Out: 8 (12VDC) handling up to 2A*
resolution AI:5.37uA/LSB AO:5.306761 uA/LSB
user
interface
Wireless 802.11b/g/n, Ethernet N/A
enclosure IP 66
dimensions 8.88" H x 12.36" W x 4.72" D (226 mm H x 314 mm W x 196 mm D)
mounting surface
ambient
temperature
23 to 113 deg F (-5 -to 45 deg C), 5-95% Relative Humidity
shipping
weight
5 lbs (2.3 kg)
agency
approvals
(Approvals still pending) CE, FCC, Intertek, RoHS
SPECIFICATIONS
Touch Screen with Power Supply (7-06362M) Touch Screen without Power Supply (7-06362L)
AC input power 1.5A/115VAC, 0.9A/230VAC, 0.75A/277VAC Frequency:
50-60 Hz
-
DC power - 0.43A/24VDC
user interface 10.1" Touchscreen
enclosure IP 65
dimensions 14.3" H x 11.81" W x 5" D (363 mm H x 300 mm W x 127 mm D)
mounting surface
ambient temperature -20 to 70 deg C, 5-90% Relative Humidity
shipping weight 7.5 lbs (3.4 kg)
agency approvals CE, UL