Sentry Sample Sequencer 6 - General Description

Sentry Sample Sequencer 6 Controller 7
Environmental: Indoor use only
Operating Altitude: 0–2000 m (0–6562 ft) (Consult factory for other altitudes.)
Mains supply uctuation: -10% and +10%
Transient overvoltage: 1500 VAC
Pollution degree: 2
Shipping Weight: 5 lb (2.27 kg)
General Description
The Sentry Sample Sequencer 6 reduces the number of required analyzers while maintaining equivalent data accuracy.
 Electronically switches up to eight sample streams, one at a time, to a shared analyzer and provides signals to
recorders.
 If eight sample streams are not needed for one process, four to eight points may be assigned to one.
 Track and hold outputs provide independent outputs for each sample point to remote data acquisition devices
(DCS, recorder, etc.).
 Digital outputs provide channel number indication and/or replicate analyzer alarms for remote data.
 Measures the analyzer analog output signal and converts the analog signal to digital data.