31
10. Suction hose 2”
11. PTO
12. Hydraulic pump
13. Pressure hose ¾”
14.Directional control valve
If the maximum allowed oil ow cannot be automatically set by either
adjusting the maximum rpm for the engine or by a ow control function
in the directional control valve, then an oil ow limiting valve needs to be
installed in the pressure line before the directional control valve.
If a cable remote control is used the valve must be electro pneumatically or
electrically controlled and with Hirschman or Deutsch contact.
15. Ball valve assembly
Winch basics
To Next Page
Loading...
