64
5.4 Engage the rope drum
Disengage the free-spool
Manual free-spool control
- Release the handle for the free-spool control.
Pneumatic or hydraulic free-spool control.
- Engage the drum by using the electrical control switch.
Activate the control valve and rotate the drum slightly until it is fully engaged.
Make sure that the free-spool clutch is fully engaged.
To avoid jamming the free-spool cylinder, regular maintenance is required. See the
chapter entitled ’Maintenance’.
Make sure nobody is inside or close to the danger zone of the winch
during operation.
WARNING
Operating instructions
To Next Page
Loading...
