Sepson SEPMATIC - 5.6 Unhook the Load

WORLD CLASS WINCHES
RELIABLE - DEPENDABLE - UNCOMPLICATED
65
5.5 Pull the load
1. Activate the control valve and continue pulling until the object is secured.
2. Stop the winch by releasing the control valve.
The spring loaded brake and the double over centre valves will automatically hold
the load in place.
(A worm gear winch will hold the load without a brake and over centre valves as it is
self-braking).
Note
The rope speed varies depending on the load and rope layer on the winch
drum.
0009-01
Operating instructions