Sepura SC20 series Service Guide

Fit the colour bar
1.
Insert the clip on the end of the colour bar into the recess on the Front Cover and then place
the removal tool below the centre.
2.
Press down on the opposite end of the colour bar to line up the clip with the recess.
3.
Remove the removal tool. This will allow the clip to locate into the recess.
4. Press in the middle of the colour bar to ensure it is properly fitted in the recess.
5. Ensure that the colour bar is secure, but can move slightly left and right.
Level 1 Service Guide 29

Sepura SC20 series Specifications

General

Operating Temperature	-30°C to +60°C
Frequency Bands	380-430 MHz
GPS	Integrated GPS, GLONASS
Bluetooth	Bluetooth 4.0
Security	TEA1, TEA2, TEA3
Transmit Power	1W, 3W, 10W
Battery Life	Up to 14 hours (standard battery)