Need help?Do you have a question about the Sepura SCG22 Series and is the answer not in the manual?
General| Brand | Sepura |
|---|---|
| Model | SCG22 Series |
| Category | Transceiver |
| Language | English |
Addresses RF energy exposure guidelines and regulatory compliance requirements.
Outlines safe operation procedures and essential power isolation steps before installation.
Describes available radio model variants and console/accessory options for installation.
Instructions for unpacking equipment and verifying its condition and completeness.
Details about the SCG22's internal backup battery and its maintenance.
Lists certified antennas and minimum safe distances for RF field strength compliance.
Discusses potential RF interference with vehicle electronic systems and installation best practices.
Guidelines for positioning the console for optimal operator access and safety.
Recommendations for SCG22 placement, considering airflow, temperature, and EMI.
Steps for sealing connectors to maintain IP54 rating against dust and moisture.
Procedures to verify RF compatibility with vehicle electronic systems after installation.
Lists available SCG22 model variants and the standard supplied parts.
Details optional connecting leads and various mounting kits for the SCG22.
Step-by-step instructions for fitting a SIM card into the SCG22.
Guidance on fitting the SCG22 into a DIN slot, considering depth and cable clearance.
Instructions for installing the SCG22 using the DIN mount kit.
Details on connecting the SCG22 to the vehicle's 12V DC power supply.
Information on connecting loudspeakers to the SCG22.
Guidelines for installing the TETRA antenna for optimal performance.
Instructions for installing the GNSS antenna for GPS/GLONASS reception.
Guidance on installing the optional Bluetooth/Wi-Fi antenna.
Explains the compatibility of SRG I/O lines when connecting to the SCG22.
Details on using the USB lead for programming the SCG22.
Instructions for connecting the power and ignition lead to the SCG22.
Information on connecting loudspeakers and I/O using the SCG Loudspeaker/IO Lead.
Details on connecting loudspeakers and USB devices using the host lead.
Information on connecting a second loudspeaker and 8 GPIO lines via an expansion board.
Explains the configuration and functions of the SCG22's digital I/O lines.
Technical specifications for the SCG22's digital input and output lines.
Describes the rear panel LED indicator's illumination and operational status.
Step-by-step guide for connecting and routing cables for the SCC3 console.
Diagram showing fixing hole positions and dimensions for mounting the SCC3.
Installation instructions for the dash mounted pivot kit for the SCC3.
How to set the HBC3 to Handset mode or Fist Mic mode during startup.
Guidance on installing the remote microphone and switches accessory.
Steps for programming the SCG22 using the USB Programming Lead and Radio Manager software.
Methods for customising the SCG22 via USB or serial connections.
Instructions for installing an optional Remote SIM Reader with the SCG22.
Information on connecting a Mobile Data Terminal (MDT) to the SCG22 or SCC3.
To Next Page