Sercel VE432 DPG - Unpacking

INTRODUCTION
UNPACKING
0311385 Issue : April 1999
1-6
UNPACKING
The VE432 system is composed of one or more of the following pieces of equipment
(depending on the configuration to be implemented):
- Digital Pilot Generator: DPG.
- Accessory set.
- Digital Servo Drive: DSD (See DSD Installation manual).
The VE432 DPG is composed of:
o a DPG unit (1717075017) including:
- a DVP board (1717074848)
- an SAPG board (1717074645)
- a DIO board (1717074678)
o a DPG Installation and Reference Manual (0311385)
o a DSD Installation and Reference Manual (0311378)
o an accessory kit (1717075235) including:
- a VE432DSD-E GROUND CABLE (1716075996)
- a VE432DPG-E RADIO CABLE (1717075948)
- a VE432DPG-E RECORDER CABLE (1717075949)
- a VE432DPG-E ANALOG PILOT CABLE (1717075950)
- a VE432 ETHERNET BNC/BNC CABLE (1717076385)
- an ATA & TRUE IDE MODE PC board (3120077)
- an R404011 coaxial load (3530117)
- a coaxial T adapter (5050210)
- a 50 OHM coaxial cord, 5 m long (5050212)
- two black banana plugs (5110051)
- ten 5X20 fuses, 2.5 A (5330119)
- a power cord, 2.5 m long (6050039)
- an RJ45 cable, 5 m long (6050047)