Sercel VE432 DPG - Software Installation; Solaris Installation or Re-Installation

SOFTWARE INSTALLATION
SOLARIS INSTALLATION OR RE-INSTALLATION
0311385 Issue : April 1999
3-1
SOFTWARE INSTALLATION
SOLARIS INSTALLATION OR RE-INSTALLATION
Check the version on your SOLARIS CDROM : SOLARIS V2.5 or 2.5.1.
NOTE: for an ULTRA 5 station, SOLARIS 2.5.1, HW 11/97 is required.
• Insert the SOLARIS CDROM into the drive.
• Power on the workstation.
IMPORTANT
If this is a first-time installation, the station automatically runs JUMPSTART. Press
both STOP and A to stop JUMPSTART as soon as it starts running (this is
signalled by a message on the screen).
Wait for the prompt OK to appear, then type boot cdrom ↵↵
NOTE : If this is a re-installation, select "QuitMwm" with the left mouse button ;
when "OK" shows up, type boot cdrom ↵↵
• Wait for the "Solaris Installation Program" window to appear (this takes a
few minutes).
• Click "Continue".
• In the "Identify this system" window :
- Click "Continue"
• In the "Hostname" window :
- Click in the text box
- Type hci388
- Click "Continue"
• In the "Network Connectivity" window :
- Networked : yes should be activated (by default)
- Click "Continue"