EasyManua.ls Logo

Sercel VE432 DPG - Page 34

Default Icon
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SOFTWARE INSTALLATION
SOLARIS 2.5 INSTALLATION OR RE-INSTALLATION
0311385 Issue : April 1999
3-2
In the "IP address" window shows up :
- Click in the text box
- Type 150.10.128.1
- Click "Continue"
In the "Confirm Information" window :
- Click "Continue" if the configuration information you entered is correct (or
click Change if required).
In the "Name Service" window :
- Activate Name Service : None
- Click "Continue"
In the "Confirm Information" window :
- Click "Continue" if the configuration information you entered is correct (or
click Change if required).
In the "Subnets" window :
- System part of a Subnet : No should be activated (by default)
- Click "Continue".
In the "Time Zone" window :
- For example, activate Specify Time zone by : Geographic
region.
- Click "Set".
- In the "Geographic Region" window, activate :
. Region : Europe (example)
. Time zone : Midde Europe (example)
- Click "Continue".
- In the "Date & Time" window,
. enter the Year, Month, Day, Hour, Minute
. click "Continue"
In the "Confirm Information" window :
- Click "Continue" if the configuration information you entered is correct (or
click Change if required).
In the "Install Solaris Software — Initial" window :
- Click "Continue".
In the "Upgrade System" window,
- Click "Initial"